ISO INTERNATIONAL STANDARD 29022 First edition 2013-06-01 Dentistry Adhesion Notched- edge shear bond strength test Médecine bucco-dentaire - Adhérence - Essai de résistance au cisaillement sur échantillons a bord entaille Reference number ISO 29022:2013(E) LSO IS02013 IHS under itted without license from IHS Not for Resale IS0 29022:2013(E) COPYRIGHTPROTECTEDDOCUMENT ISO2013 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISO's member body in the country of the requester. IsOcopyrightoffice Case postale 56:CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail [email protected] Web www.iso.org Published in Switzerland @ IS0 2013 - All rights reserved networking permitted without license from IHS Not for Resale IS0 29022:2013(E) Contents Page Foreword ..iv Introduction. ..V 1 Scope. ..1 2 Normative references ..1 3 Terms and definitions ..1 4 Tooth substrate and storage ..1 4.1 General .1 4.2 Time after extraction .2 4.3 Condition of teeth. 2 4.4 Initial preparation and storage of teeth .2 5 Tooth surface preparation .2 5.1 General 2 5.2 Potting (mounting) of teeth .2 5.3 Surface preparation 3 5.4 Storage of prepared specimens .3 6 Specimen production, handling and storage .3 6.1 General 3 6.2 Preconditioning .3 6.3 Application of adhesive .3 6.4 Insertion into bonding clamp 4 6.5 Composite placement. .4 6.6 Specimen handling and storage .4 7 Notched-edge shear test .5 7.1 Apparatus .5 7.2 Shear loading. 6 7.3 Test. ..6 7.4 Recording and treatment of results 6 7.5 Report .6 Annex A (normative) Detailed drawings of notched-edge shear apparatus ..8 iii ded by IHS under lic cense with ISt ed without license from IHS Not for Resale